Muscle Machine

Muscle Machine

There are lots of muscles that help to move your arm in all the many ways it can move. The bicep and tricep muscles are two of the most noticeable, partly because of how big they get on some body builders. These paired muscles flex and extend the elbow joint, allowing you to bring a fork to your mouth or throw a frisbee. When one flexes, the other relaxes.

In this muscle machine, you’ll be mimicking the action of a muscle by pulling a string. This is actually pretty similar to how your muscles work. Muscles are made up of long fibers of cells, kind of like bundles of string. The cells in a relaxed muscle fiber are long and skinny. When a muscle flexes, the cells yank themselves together, going from long and skinny to short and round. This shortens the muscle fiber too, so anything the muscle fiber is attached to will move in the direction of its contraction. The string mirrors this by changing its length when you pull on it.

Download the printable here

9 - 16
Est. Time:
<30 mins

How we did it:

Materials List

  1. printable
  2. scissors
  3. crate box - or cardboard
  4. pencil
  5. pushpin
  6. brads (8)
  7. bobbins (4)
  8. string
  9. double-sided tape
  10. zip ties (2)
  11. plastic bottle - or glass bottle
  12. water - optional
  1. Gather your materials!

  2. Print the printable. Then, cut out the pieces. 

  3. Set the bicep and tricep pieces aside. Trace the rest of the pieces onto the cardboard and use the pushpin to mark where the holes are.

  4. Tip!

    The holes are indicated by the small circles on the printable.  

  5. Cut out the cardboard pieces. 

  6. Use double-sided tape to stick on the bicep and tricep pieces on the oval-shaped cardboard cutout. Then, widen each of the marked holes with a brad. The brads should easily fit into each hole.

  7. Fasten the bobbins to the cardboard pieces with the brads as pictured. 

  8. Use another brad to connect the cardboard pieces (bicep and shoulder) as pictured.

  9. Fasten two brads to the cardboard piece (forearm) as pictured. 

  10. Cut two pieces of string about 18” in length. 

  11. Tie a loop-knot on one end of each string. Then, wrap the loop around the two brads on the forearm.

  12. Connect the cardboard pieces (forearm and bicep) as pictured.

  13. Thread the string onto the bobbins as follows: clockwise for the top string (bicep) and counterclockwise for the bottom string (tricep). 

  14. Use the pushpin to make a set of holes just above and just below the bobbins. Then, thread the zip ties through the holes. 

  15. Secure the cardboard arm to the bottle with the zip ties. Then, start experimenting! 

    To move the arm up and contract the bicep muscle, pull on the top string. To move the arm down and contract the tricep muscle, pull on the bottom string

    When you have gotten a hang of how the muscles work, see if you can pick something up! 

  16. Learn More!

    There are way more muscles involved in moving your arm than just your biceps and triceps. Extensor and flexor muscles run through your forearm to move your wrist around. The deltoids on top of your shoulder, the pectoralis major on the front of your chest, and the latissimus dorsi on your back all help move your shoulder around. Your body has 650 muscles!

    Many muscle groups work in pairs like the bicep and tricep. Flexing one will move a limb one way, and flexing the other will move it back. Which other muscle pairs can you find?

    Some to check out: flexing your foot up and down, bending and unbending your knee, moving your leg away from your body and back, and bending forward and backward.