200 Quick & easy experiments

Crazy chemistry experiments

Electronics & Robotics

Engineering & Building

Motion & Mechanics

Anatomy & Biology

Toy & game design

Math made fun

STEM Activities

750+ Quick & easy craft ideas

Recycled creations

Fun & functional projects

Jewelry & Fashion design

Handmade cards & gifts

Art & Creativity

Fun & Games

Hands-on learning

Sound & Music

Pretend play

Play & Learn

Kitchen science

Fun with food

Sweet & salty snacks

Treats & Dessert

Cooking for kids

Cooking & Baking

Animals & Bugs

Plants & Rocks

Seasons & Weather

Radical rainbows

Outdoor Adventures

Space exploration

Nature & Adventure

Birthday fun

Pi Day

Earth Day

Easter

Holiday & Events

indoor project

toy design

engineering

mechanics

KiwiCo crate box

motion

STEM

science project

pretend play

recycled craft materials

recycled

Explore engineering with this simple cardboard elevator. Then use your imagination to turn it into a parking structure lift, a dollhouse feature, or anything you like!

a11ee9834d999.jpg

Cut the lid off your crate. We'll use both the base and the lid in our lift construction.

a0cd0011cb1e4.jpg

Cut a strip of cardboard from the lid, making it slightly narrower than the interior depth of the crate. If you're using a crate, this would be about 3 inches. Next, place the cardboard strip next to the box. Note where the sides of the box end, and mark the placement, going a little narrower than the width of the box. If you're using a crate, this would be just under 6 inches. You'll use this portion to create the inside of your lift. Score and fold the edges of the strip up. Make sure that both of your tabs are even in length. This piece will be the base of your lift.

a558287df774e.jpg

Next cut a thin strip from the remaining cardboard lid, about 1 or 2 inches. Place this strip next to the first wider strip and mark just inside the fold lines of the last strip you cut. Score and fold the flaps of this thinner strip down. This thinner strip will be the top of your lift.

a831c74819212.jpg

On the thin strip of cardboard, measure roughly a half inch from each side and punch a hole.

ab131bd7906ab.jpg

Place the wider strip of cardboard on a flat surface with its tabs folded upward. Then, put the thinner strip on top and fold its flaps downward. The thin strip should fit just along the inside flaps of the wider base strip, creating a rectangular shape. Use hot glue to attach them together.

a5056f123a89b.jpg

Measure out and cut a length of string that is about twice the height of your crate when it's standing upright. Loop the string through the holes and tie your string together in a simple overhand knot.

a4055998e8a22.jpg

Now that all of your pieces are made, It's time to decorate! Use assorted cardstock and patterned tape to design your lift any way you would like!

aded454483316.jpg

With the base of your crate upright, mark two holes along the sides of the box, about an inch from the top. Use a craft knife to cut these holes out, cutting them wide enough to fit the wooden dowel.

a11da263b6329.jpg

Insert your dowel into the two holes. Your dowel should be level.

aefc05ef01e0f.jpg

Place the lift at the base of the crate, with the string and holes on top. Find the center of the looped string and tape it to the center of the dowel rod. It is important to get this centered or else your lift will not operate correctly.

a6a4ff9bb3e09.jpg

You now have a working lift! To make your lift go up, twist the dowel so the string wraps around the dowel, pulling up the lift. What fun objects can you find to put on your lift? What are some everyday machines that use a similar mechanism?

Want to make your elevator less work to use? Try cutting a cardboard circle and attach it to one end of the dowel. With the wheel added, you’ve turned plain old dowel into a wheel and axle mechanism. A wheel and axle is a super-handy simple machine used in everything from doorknobs to vehicles to — you guessed it — elevators. Together, the wheel and axle allows you to lift heavier loads than without it. If you’re only lifting pom-poms and cardboard, of course, it doesn’t make much difference. But if you were building a real elevator lifting thousands of pounds, you’d want all the help you could get!

crate or box

dowel

string / twine

tape

hot glue

scissors

craft knife

cardstock

hole punch

Cardboard Elevator

sounds

sound science

musical instrument

music

Create a recycled musical instrument using just an empty cardboard box and rubber bands. Then decorate, play, and explore sound vibrations!

a62a14253d910.jpg

Open your crate and paint the bottom and inner sides with a bright and fun color acrylic paint. Wait for the paint to dry. 

ae88575786609.jpg

Close the box and find a round shape to trace for the main sound hole of the guitar. We used a medium sized bowl, but a wide drinking glass or a CD would work too. Close your crate and lay the round item on top of the lid so it's centered width-wise on the crate, but closer to one end. Trace the edge with a pen or pencil. 

afd864d5ab5eb.jpg

Using a craft knife, make the initial cut into the traced line. Always make sure to cut away from you! Continue cutting along the traced line around the entire circle. If needed, have a parent help with this step.

a3ff6a6498f75.jpg

Now turn your crate and look at the side panel of the box near the big hole. Place your craft tube on the center of the top panel and trace it. With a parent's help, carefully cut out the traced circle.

ac92d519a0d53.jpg

The craft tube will serve as the neck of the guitar. Decorate it and get creative! We wrapped bright paper around the neck and also added pom poms to represent the tuning pegs of the guitar. If you like, you could also decorate it with paint or washi tape. 

a88b591bf969e.jpg

Insert the craft tube into the smaller hole along the side of the box. If necessary, add some hot glue to the sides of the hole to keep the neck in place.

Fold a piece of cardstock paper a few times over, like an accordion. Glue the folded paper below the large hole, on the opposite end of the guitar neck. This will serve as the bridge for your guitar, lifting the rubber bands off the crate.

ad39e6fec7a83.jpg

Loop four long rubber bands (2 on each side of the craft tube) around the crate.

a889be745759c.jpg

Strum the DIY guitar! We found that adding different thicknesses and sizes of rubber bands to create different tones! We also tied a ribbon to our guitar to represent a guitar strap.

empty crate

craft tube

4 rubber bands

card stock

pen or pencil

pom poms

acrylic craft paint

paint

small bowl

glue gun

Cardboard Guitar

Groundhog Day

Groundhog Day crafts

physics

animals

game

Use weighted popsicle sticks and rubber bands to create your own version of a classic arcade game, then challenge a friend to play!Download the printable <a href="http://images.kiwicrate.com/diy_ad/Kiwi-Co-Whack-A-Groundhog-Printable.pdf">here</a>.

a85776833ff1d.jpg

a6b2cef5c0aef.jpg

Cut out the objects on the printable. Then, set the groundhog cards aside and glue the gameboard to the top of the crate box. 

a012663e25aa0.jpg

Use the lip of the cup to trace a circle in the middle of each of the holes. 

aa67832117606.jpg

Cut out the circles on the top of the box with an X-acto knife. You will need a grownup assistant to help you. 

Cut slightly inside the marked circle so that when you place a cup into the hole it doesn’t fall through.

a17a102b45c98.jpg

 Cut a rectangle into one of the sides of a dixie cup. Do this to six cups. 

a2263f34ec3a8.jpg

Place the six cups into the holes on the top of the box. Then, glue them in place so that the holes you cut into the cups face the long sides of the box. 

abeca962bc7b9.jpg

a642eb7575d8c.jpg

On the long sides of the crate, use a skewer to make holes that line up with the center of each of the cups and is about half inch from the top of the crate. 

a9e6c4c31fb5f.jpg

Widen these holes just enough so that a popsicle stick fits through them. 

aeb6cca9868fd.jpg

Glue quarters to the ends of the popsicle sticks. Let them dry. 

Slide the popsicle sticks into the holes on the side of the box as pictured. Then, double wrap rubber bands on both sides of the popsicle stick. 

a4384f3dcd940.jpg

Push the rubber bands towards the middle of the popsicle stick so that they “hug” the side of the box. This will help keep the popsicle stick from sliding forward and backward when playing! 

a97395d73ad11.jpg

Glue the groundhog cards to either side of the clothespins. 

ac47dfaab5c7b.jpg

Clip the clothespins onto the ends of the popsicle sticks in the cup. 

a96d11855dc00.jpg

Glue two cups together, sandwiching the pointy end of the skewer in between them. This will be your mallet. 

a649f043d3007.jpg

Wrap yarn around the mallet until it is completely covered. 

a24de3d472af3.jpg

Play with your whack-a-mole! The quarters serve as weights to keep your groundhogs popping up even after you whack ‘em down. 

crate box

dixie cups (8)

popsicle sticks (6)

quarters (6)

clothespins (6) - small

white glue

x-acto knife

rubber bands (12) - tiny

yarn

skewer

pencil

Whack-A-Groundhog

food play

craft

3 material crafts

household craft

homemade craft

easy craft

quick craft

Quickly “age” paper with tea bags to create a beautiful worn-looking texture, then use it to create maps, journals, posters, and more.

a6b8b213d7766.jpg

Heat up a cup of water in the microwave or in a pot. Add a tea bag and allow it to steep for at least 10 minutes.  

af79993dd38de.jpg

Take your paper and tear around the edges to make it look worn.  

a8e2a2726428e.jpg

Allow tea bag to cool enough so it is safe (and comfortable) to handle. Do not ring out too much tea from the bag, but enough so you do not over saturate the paper. Use the tea bag as a paint brush and cover the entire piece of paper.  

a65915da56344.jpg

If desired, allow the first coat to dry and repeat for a darker color.

a6a143c66069a.jpg

You can also create the tea paper on paper that has not been torn along the edges. Here the student is creating tea paper to use to make a old-fashioned circus poster!

abe854dc72fa6.jpg

Once the paper is dry, use it to make a map.

a036aabe59e56.jpg

Or to create a poster that looks weathered by time.

1 tea bag

water

white paper (construction or computer paper)

Making Tea Paper for Maps, Journals and More

fall

summer

luminary

Christmas

Christmas crafts

These lanterns are especially charming in the autumn and winter, thanks to cozy indoor craft projects and soft golden candlelight...

a7622352000ec.jpg

Grownup supervision is required for this project. (My daughter just 
turned seven, but we tackled this project for the first time when she 
was just four...and we still love it!) 

a2215cc9274b5.jpg

The day before we planned to make our lanterns, we washed the cans, 
filled them near the top with water, and put them in the freezer. (The 
ice will keep the cans from smashing and denting as you hammer on the 
cans.)

Panda Crate

Sprout: Koala Crate

Labs: Kiwi Crate

World: Atlas Crate

Studio: Doodle Crate

Labs: Tinker Crate

Studio: Maker Crate

Labs: Eureka Crate

91 awesome recycled craft materials projects for kids

Screen-free fun!